Hudson-robotics Micro10x Manual do Utilizador descarregar pdf (Página 13)

Figure 2. 4.1

Volume – This is the total volume that will be primed through the system. Enter a

value between 120 and 9999uL.

Speed – This adjusts the percentage of the pumps maximum speed. More viscous

liquids will require a slower pump speed to avoid cavitation. Do not exceed more

than 30% speed on any value over 1000ul.

Tip Touch – Activate or deactivate tip touching after each dispense.

Tip Touch – Adjust where in the Priming trough you would like to touch the tips

after a prime. This is helpful when running viscous liquids.

2.5 - Empty Dispenser

This feature reverses the pump, removing most of the liquid from the manifold

and tubing and returns it to the source container (Figure. 2.5 1).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 29 30

Sem comentários

Hudson-robotics Micro10x Manual do Utilizador Página 13